T-REX 450LP ARTF (AC) พร้อมบิน

T-REX 450 has been the ideal choice for entry level R/C helicopters. To cater to the beginner enthusiasts and solve the problem of assembly and adjustment, Align introduced T-REX 450LP ARTF (Almost Ready to Fly). Completed with Align A10 transmitter and newly released MiniGRS flybarless system, just easy to experience the fun fly enjoyment.The helicopter utilizes DFC rotor, paired with MiniGRS flybarless system optimized for T-REX 450LP flight characteristics. Without any adjustment or tuning, this combo will be provided optimal stability suitable for pilot of all levels.Equipped with newly digital high voltage servo DS450 and DS455, supports 8.4 high voltage to provide optimal speed and torque performance. Paired with newly RCE-BL45P ESC, supports adjustable 5~8.4V BEC function to highly improve flight performance.ALIGN A10 is AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz transmitter provided with 10 channels. The stick and holder are designed based on ergonomic bringing much smoother control. Completed function with the mode of helicopter / aircraft / multicopter. Logical and simple control interface, and easy to set up.With the addition of the brand new A10 transmitter and MiniGRS, the T-REX 450LP ARTF pushes past the performance limitation of flybar helicopter, improving both stability and 3D performance, while maintaining a down to earth price level.



Focus Shots





















Standard equipment
A10 Transmitter x 1A6B Receiver x 1RCE-BL45P ESC x 1460MX Brushless motor(3200KV/2222) x 1DS450 Digital servo x 3DS455 Digital servo x 1MiniGRS Flybarless System x 1Balance Charger RCC-3SX x 13S1P 11.1V 2200mAh/30C Battery x 1



T-REX 450LP Specification
Length: 705mmHeight: 205mmWidth: 110mmMain Blade Lenght: 325mmMain Rotor Diameter: 734mmTail Rotor Diameter: 171mmMotor Drive Gear: 11TMain Drive Gear: 121TAutorotation Tail Drive Gear: 106TTail Drive Gear: 26TDrive Gear Ratio: 11:1:4.07Weight(w/o battery): 730g

Accessories
T-REX 450LP Kit x 1 setMiniGRS Flybarless System x 1 setA10 Transmitter x 1A6B Receiver x 1325 Carbon Fiber Blades x 1 setRCE-BL45P ESC x 1460MX Brushless motor(3200KV/2222) x 1DS450 Digital servo x 3DS455 Digital servo x 13S1P 11.1V 2200 mAh/30C Li-polymer Battery x 1Balance Charger RCC-3SX x 1 set1.5V AA Zinc-Carbon Battery x 4
Radio transmitter and electronic equipment required for assembly
Dial Pitch Gauge or Digital Pitch GaugeSwashplate Leveler


A10 Specification
Channel: 10-ChannelAvailable Models: helicopter/airplane/multicopterFrequency range: 2.408 ~ 2.475 GHzPower: no higher than 20dBm(For EU)System Mode: 2.4G system AFHDS 2ASuitable Voltage Range: 4.0 ~ 6.0V DCReceiving Distance: the open ground no interference < 1000MLow Voltate Warning: Lower than 4.2VWeight: 485g (excluded battery)Size: 275x187x102mm

A6B Receiver Specification
Channel: 14 channelsRX Sensitivity: -105dBmRF Range: 2.408 ~ 2.475 GHzSystem Mode: 2.4G system AFHDS 2APower: 4.0 ~ 8.4VTransmit Distance: In open space without interference <1000MDimension: 46.7x25.5x13.6mm




MiniGRS Flybarless System Specification
Operating voltage range: DC 3.5~8.4VOperating current consumption: <100mA @ 4.8VRotational detection rate: ±300°/secRudder yaw detection rate: ±600°/secSensor resolution: 12 BITSwashplate Support: 120° CCPM SwashplateMode Support: T-REX250, T-REX450, T-REX470, T-REX500Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMXOperating temperature: -20 ~ 65Operating humidity: 0% ~ 95%Comply with RoHS restrictionsSize: 37.6x22.4x13mm

Balance Charger RCC-3SX Specification
Input Voltage: AC 100V~240V(50/60Hz)Output Voltage: 2cell DC 7.4V / 3cell DC 11.1VSupported Battery Type: Li-polymer / Li-ionCharging Method: CC/CVCharging Current: 2ASize: 123x74.3x32mmWeight: 260g
Battery Specification
Output: 11.1V 2200mAh 24.4Wh(3S1P)Supports 5C chargingDimension: 104x36x22mmWeight: 165g14AWG heat-resistant silicone rubber wire. Heat resistance: 200 ° C / Current withstand: 50A